Spray Plastic Metal Mesh Fencing for Solar Photovoltaic Power Station

🕢 [ ¡Rellene el formulario y le responderemos en 24 horas! ]


🌟 Why Pick This Fence

  • Stops people and animals from getting too close
  • Made with PVC coated metal mesh
  • Works in hot, cold, wind, and rain
  • Easy to put up and take care of
  • Looks neat and clean

🔍 What It’s Made Of

PartDetails
MaterialQ195 or Q235 low-carbon steel wire
Wire Size3.0mm before spray, 3.9–4.0mm after
Mesh ShapeRectangle: 75mm × 150mm
CoatingPVC or hot dip galvanizing
ColorGreen, White, Blue, Red (custom too)

📏 Sizes and Strength

CaracterísticaSpecification
Fence Height1.2m / 1.5m / 1.8m
Post TypeRound: 48mm or Square: 40x40mm
Wind ResistanceUp to 88 m/s
Snow LoadUp to 2.0 KN/m²
Life Span25+ years
Warranty10 years

Metal Fence Type 1

Metal Fence Type 1 2

Metal Fence Type 2

Metal Fence Type 1 1 1

🛠️ How to Install

Three ways to set up the fence:

  • Embed in the ground
  • Use flange base
  • Bolt it into concrete

All parts are pre-cut. Very easy to set up.


🏞️ Where You Can Use It

This spray plastic fencing is good for many places:

PlaceWhy It Works Well
Big Solar FarmsKeeps panels safe from people and animals
Farms with Solar PanelsStops cows and goats from walking near the panels
Factories & BuildingsAdds security for commercial solar stations
Houses with Solar SystemsLooks nice and keeps kids and pets away
Hot or Coastal AreasThe spray coating protects from sun and salt

🔗 Related Products


📦 What’s in the Box

  • Fence Panels (you pick the height)
  • Fence Posts
  • Connectors and Bolts
  • Tools and Setup Guide

💡 Good to Know

  • Fence is UV-resistant
  • No rust for 25+ years
  • Saves money over time because no repainting needed
  • Matches many solar rack systems

Best for

  • Solar panel fencing
  • Metal mesh fencing for solar farms
  • PVC spray fencing for PV sites
  • Rust-proof security mesh
  • Protective fencing for solar power plants

Centro de ayuda

¿Tiene alguna duda? Consulte estas preguntas y respuestas

Firstsolar tiene su propia fábrica con más de 80 trabajadores cualificados y experimentados, la línea de producción es estrictamente de acuerdo con altos estándares y conceden gran importancia al control de calidad y la inspección.

Por supuesto, nuestros ingenieros de producción de primera clase, técnicos y equipo de I + D ofrecen un diseño innovador y una solución fiable a los clientes sobre la base de más de 8 años de experiencia.

Sí, Firstsolar lleva más de 10 años ofreciendo servicios de OEM, diseño y etiquetado.

Sí, los productos de Firstsolar han sido certificados por ISO, SGS, TUV y AS/NZS 1170.2.

Depende de la cantidad real del pedido y de sus requisitos especiales. Generalmente, será 1-2weeks.

Si el importe total es inferior a $5000, necesitamos 100% por adelantado; si el importe total es superior a $5000, necesitamos 30%T/Tin por adelantado.