
🛡️Hot Dip Galvanizing Fencing Panels for Ground Mount Solar System
🕢 [ フォームにご記入ください。]
These fencing panels keep your solar power system safe. They are made from strong steel and covered with hot dip galvanizing to stop rust.
🌟 Why This Fence Is Great
- Strong steel lasts many years
- Hot dip galvanized to stop rust
- Keeps your ソーラーパネル safe from people and animals
- Works in sun, rain, snow, and 風
- Easy to put up
🧱 What It’s Made Of
Part | 素材 | Special Coating |
---|---|---|
Fence Panel | Q235/Q355 Steel | Hot Dip Galvanized 70–100μm |
Fence Post | Carbon Steel | Anti-rust Galvanized |
Fence Mesh | Welded Steel Wire | Zinc-Coated |
📏 Sizes
Item | Details |
---|---|
Height | 0.8m to 1.8m |
Post Span | 2 m or customized |
Mesh Spacing | 70*150mm or 100*100mm |
Coating | 80μm – 100μm |
Wind Load | Up to 60 m/s |
Snow Load | Up to 2.4 KN/m² |
Colors | Silver |
🏞️ Where You Can Use It
Place | Why It’s Good |
---|---|
Solar Farms | Keeps people and animals out |
Agricultural Land | Protects panels from cows and goats |
Industrial Sites | Adds security |
Homes | Looks nice and keeps kids safe |
Deserts | Works well in sun and heat |
Coastal Areas | Stops salt from causing rust |
🔗 Related Products
- Check our 地上設置型ソーラーシステム to match with your fencing.
- For farms, visit 農地用ソーラー架台.
- Want full rust-proof solutions? See our Hot Dip Galvanized Photovoltaic C-shaped Steel Bracket.
- For fence alternatives, look at Spray Plastic Metal Mesh Fencing.
- Need cable protection too? Try our Solar Pv Cable for Solar Energy Panels.
🛠️ Easy to Use
- Pre-cut そして pre-drilled
- You only need a few basic tools
- Can be put up in just one day
💪 Lasts a Long Time
- No need to paint
- Can last 30 years
- Works with any ground solar mounting system
✅ Why Choose This Fence
- Safe
- Tough
- Looks good
- Low cost over time
- Made to fit your solar project
📦 Package Includes
- Fence Panels
- Posts
- Clamps and Connectors
- Instruction Manual

Project Reference

ヘルプセンター
ご質問ですか?こちらの質問と回答をご覧ください。
Firstsolarは、80人以上の熟練した経験豊富な従業員を擁する自社工場を持っており、生産ラインは高水準に厳格に従っており、品質管理および検査を非常に重視しています。
もちろん、私たちの一流の生産エンジニア、技術者、R&Dチームは8年以上の経験に基づいて、お客様に革新的なデザインと信頼性の高いソリューションを提供します。
はい、Firstsolar は 10 年間以上 OEM サービス、設計サービスおよびバイヤーのラベル サービスを提供しました。
Firstsolarの製品は、lSo、sGS、TUVおよびAS/NZS 1170.2の認証を受けています。
それは実際の順序の量およびあなたの特別な条件によって決まる。一般的に、それは1-2週間となります。
合計金額がUS$5000未満の場合は100%、US$5000以上の場合は30%T/Tinの前払いが必要です。