Spray Plastic Metal Mesh Fencing for Solar Photovoltaic Power Station

🕢 [ Vul het formulier in en we reageren binnen 24 uur! ]


🌟 Why Pick This Fence

  • Stops people and animals from getting too close
  • Made with PVC coated metal mesh
  • Works in hot, cold, wind, and rain
  • Easy to put up and take care of
  • Looks neat and clean

🔍 What It’s Made Of

PartDetails
MaterialQ195 or Q235 low-carbon steel wire
Wire Size3.0mm before spray, 3.9–4.0mm after
Mesh ShapeRectangle: 75mm × 150mm
CoatingPVC or hot dip galvanizing
ColorGreen, White, Blue, Red (custom too)

📏 Sizes and Strength

FeatureSpecification
Fence Height1.2m / 1.5m / 1.8m
Post TypeRound: 48mm or Square: 40x40mm
Wind ResistanceUp to 88 m/s
Snow LoadUp to 2.0 KN/m²
Life Span25+ years
Warranty10 years

Metal Fence Type 1

Metal Fence Type 1 2

Metal Fence Type 2

Metal Fence Type 1 1 1

🛠️ How to Install

Three ways to set up the fence:

  • Embed in the ground
  • Use flange base
  • Bolt it into concrete

All parts are pre-cut. Very easy to set up.


🏞️ Where You Can Use It

This spray plastic fencing is good for many places:

PlaceWhy It Works Well
Big Solar FarmsKeeps panels safe from people and animals
Farms with Solar PanelsStops cows and goats from walking near the panels
Factories & BuildingsAdds security for commercial solar stations
Houses with Solar SystemsLooks nice and keeps kids and pets away
Hot or Coastal AreasThe spray coating protects from sun and salt

🔗 Related Products


📦 What’s in the Box

  • Fence Panels (you pick the height)
  • Fence Posts
  • Connectors and Bolts
  • Tools and Setup Guide

💡 Good to Know

  • Fence is UV-resistant
  • No rust for 25+ years
  • Saves money over time because no repainting needed
  • Matches many solar rack systems

Best for

  • Solar panel fencing
  • Metal mesh fencing for solar farms
  • PVC spray fencing for PV sites
  • Rust-proof security mesh
  • Protective fencing for solar power plants

Helpcentrum

Heb je een vraag? Bekijk deze vraag en antwoorden

Firstsolar heeft een eigen fabriek met meer dan 80 geschoolde en ervaren werknemers, de productielijn is strikt in overeenstemming met hoge normen en hechten veel belang aan de kwaliteit controland inspectie.

Natuurlijk bieden onze eersteklas productie-ingenieurs, technici en R & D-team innovativedesign en betrouwbare oplossingen aan klanten op basis van meer dan 8 jaar ervaring.

Ja, Firstsolar heeft OEM de dienst, de ontwerpdienst en de kopersetiketdienst meer dan10 jaar verleend.

Ja, de producten van Firstsolar zijn gecertificeerd door ISO, SGS, TUV en AS/NZS 1170.2.

Dit hangt af van de werkelijke bestelhoeveelheid en uw speciale vereisten. Over het algemeen duurt het 1-2 weken.

Als het totaalbedrag lager is dan US$5000, hebben we 100% vooraf nodig; als het totaalbedrag hoger is dan US$5000, hebben we 30%T/T vooraf nodig.