
🛡️Hot Dip Galvanizing Fencing Panels for Ground Mount Solar System
Wypełnij formularz, a my odpowiemy w ciągu 24 godzin!
These fencing panels keep your system zasilania energią słoneczną safe. They are made from strong steel and covered with hot dip galvanizing to stop rust.
🌟 Why This Fence Is Great
- Strong steel lasts many years
- Hot dip galvanized to stop rust
- Keeps your panele słoneczne safe from people and animals
- Works in sun, rain, snow, and wind
- Easy to put up
🧱 What It’s Made Of
Part | Material | Special Coating |
---|---|---|
Fence Panel | Q235/Q355 Steel | Hot Dip Galvanized 70–100μm |
Fence Post | Carbon Steel | Anti-rust Galvanized |
Fence Mesh | Welded Steel Wire | Zinc-Coated |
📏 Sizes
Item | Details |
---|---|
Height | 0.8m to 1.8m |
Post Span | 2 m or customized |
Mesh Spacing | 70*150mm or 100*100mm |
Coating | 80μm – 100μm |
Wind Load | Up to 60 m/s |
Snow Load | Up to 2.4 KN/m² |
Colors | Silver |
🏞️ Where You Can Use It
Place | Why It’s Good |
---|---|
Solar Farms | Keeps people and animals out |
Agricultural Land | Protects panels from cows and goats |
Industrial Sites | Adds security |
Homes | Looks nice and keeps kids safe |
Deserts | Works well in sun and heat |
Coastal Areas | Stops salt from causing rust |
🔗 Related Products
- Check our Naziemny system montażu paneli słonecznych to match with your fencing.
- For farms, visit System montażu paneli słonecznych na gruntach rolnych.
- Want full rust-proof solutions? See our Hot Dip Galvanized Photovoltaic C-shaped Steel Bracket.
- For fence alternatives, look at Spray Plastic Metal Mesh Fencing.
- Need cable protection too? Try our Solar Pv Cable for Solar Energy Panels.
🛠️ Easy to Use
- Pre-cut and pre-drilled
- You only need a few basic tools
- Can be put up in just one day
💪 Lasts a Long Time
- No need to paint
- Can last 30 years
- Works with any ground solar mounting system
✅ Why Choose This Fence
- Safe
- Tough
- Looks good
- Low cost over time
- Made to fit your solar project
📦 Package Includes
- Fence Panels
- Posts
- Clamps and Connectors
- Instruction Manual

Project Reference

Centrum pomocy
Masz pytanie? Sprawdź to pytanie i odpowiedzi
Firstsolar posiada własną fabrykę z ponad 80 wykwalifikowanymi i doświadczonymi pracownikami, linia produkcyjna jest ściśle zgodna z wysokimi standardami i przywiązuje dużą wagę do kontroli jakości.
Oczywiście nasi pierwszorzędni inżynierowie produkcji, technicy i zespół badawczo-rozwojowy oferują klientom innowacyjne projekty i niezawodne rozwiązania oparte na ponad 8-letnim doświadczeniu.
Tak, Firstsolar świadczy usługi OEM, usługi projektowe i usługi etykietowania kupujących od ponad 10 lat.
Tak, produkty Firstsolar posiadają certyfikaty lSo, sGS, TUV i AS/NZS 1170.2.
Zależy to od rzeczywistej ilości zamówienia i specjalnych wymagań. Ogólnie rzecz biorąc, będzie to 1-2 tygodnie.
Jeśli całkowita kwota jest mniejsza niż US$5000, potrzebujemy 100% z góry; jeśli całkowita kwota jest większa niż US$5000, potrzebujemy30%T / z góry