-
2103 Room NO.322 Xinggang One Road, Haicang District, Xiamen Fujian, Chiny
Zinc-Aluminum-Magnesium Durable Waterproofing for BIPV
Wypełnij formularz, a my odpowiemy w ciągu 24 godzin!
Here is an SEO-optimized, Flesch-Kincaid Grade 1 reading level product description for:
Zinc-Aluminum-Magnesium Durable Waterproofing for BIPV

🌟 What Is This Product?
Zinc-Aluminum-Magnesium (ZAM) waterproofing is a strong metal layer.
It is made for BIPV – Building Integrated Photovoltaics.
It keeps water out and lasts many years.
💪 Why Use It?
1. Stops Rust
- Zinc, Aluminum, and Magnesium fight rust.
- Even when scratched, it heals itself.
2. Keeps Water Out
- Uses M-shaped channels.
- Rain goes down fast – no leaks!
3. Stays Strong
- Works in snow, wind, rain, and sun.
- Great for homes and businesses.
4. Saves Money
- It lasts over 50 years.
- You don’t need to fix it often.
5. Better Than Galvanized Steel
- Works 10x longer than normal steel.
- Strong, safe, and shiny.
📏 Product Table
Feature | Description |
---|---|
Material | Zinc-Aluminum-Magnesium Coated Steel |
Life Span | 25 + years |
Use | BIPV roofs, carports, façades |
Wind Resistance | Up to 60 m/s |
Snow Load | Up to 1.4 kN/m² |
Edge Protection | Yes – heals scratches automatically |
Drainage Design | M-Type channel for waterproofing |
🧱 Where To Use It?
- Roofs with solar panels
- Solar Carports
- Flat Roof Mounting Systems
- Metal Roof Solar Mounting Systems
- Concrete Foundation Systems
🏆 Best Match With
- Mini Rail for Metal Roof Solar Mounting System
- Waterproof Solar Carport Mounting System
- C – Steel Ground Mount – Concrete Foundation
🔧 How It’s Used
- Place the ZAM sheet under solar panels.
- Use clamps or rails to hold it in place.
- Water flows down safely.
- No rust. No leaks. No worries.
✅ What Makes It Great?
- ✔ Strong like steel
- ✔ Heals scratches
- ✔ No rust
- ✔ Saves money
- ✔ Eco-friendly
- ✔ Works anywhere
🛒 Want to Buy?
Click here to visit the full product page:
👉 Zinc-Aluminum-Magnesium Durable Waterproofing for BIPV
Centrum pomocy
Masz pytanie? Sprawdź to pytanie i odpowiedzi
Firstsolar posiada własną fabrykę z ponad 80 wykwalifikowanymi i doświadczonymi pracownikami, linia produkcyjna jest ściśle zgodna z wysokimi standardami i przywiązuje dużą wagę do kontroli jakości.
Oczywiście nasi pierwszorzędni inżynierowie produkcji, technicy i zespół badawczo-rozwojowy oferują klientom innowacyjne projekty i niezawodne rozwiązania oparte na ponad 8-letnim doświadczeniu.
Tak, Firstsolar świadczy usługi OEM, usługi projektowe i usługi etykietowania kupujących od ponad 10 lat.
Tak, produkty Firstsolar posiadają certyfikaty lSo, sGS, TUV i AS/NZS 1170.2.
Zależy to od rzeczywistej ilości zamówienia i specjalnych wymagań. Ogólnie rzecz biorąc, będzie to 1-2 tygodnie.
Jeśli całkowita kwota jest mniejsza niż US$5000, potrzebujemy 100% z góry; jeśli całkowita kwota jest większa niż US$5000, potrzebujemy30%T / z góry