Concebemos soluções à medida do seu projeto e oferecemos preços competitivos.
Entraremos em contacto consigo dentro de 10 minutos.

Preencha o formulário abaixo e entraremos em contacto consigo dentro de 24 horas!

HDPE Plastic Solar Ballast Mounting System for Flat Roof Mounting Bracket

🕢 [ Preencha o formulário e responderemos em 24 horas! ]

Looking for a safe, easy, and roof-friendly way to install solar panels on flat roofs? Our HDPE Plastic Solar Ballast Mounting System is the perfect solution. Made from strong plastic that lasts over 25 years, this system is ideal for places where you can’t make holes in the roof.


✅ What Is It?

This is a heavy-duty plastic base that holds solar panels in place without drilling holes in your roof. It’s made from HDPE (High-Density Polyethylene), a super-strong plastic that’s used outdoors because it doesn’t break, rust, or fade in the sun.

HDPE Plastic Solar Ballast Mounting System 4

🌟 Why It’s Great

  • 🔩 No Holes – Keeps your roof watertight
  • ⚡ Fast Setup – Just 30 minutes per kW
  • 💨 Wind-Resistant – Holds strong in winds up to 130 mph
  • ⏳ Long-Lasting – 25-year durability, no corrosion
  • 🏠 Fits Any Flat Roof – Works on TPO, EPDM, PVC, and more

🧱 What It’s Made Of

HDPE Plastic is:

  • ☀️ UV-resistant – won’t break down in sunlight
  • 🌊 Corrosion-free – unlike metal, perfect for salty air
  • ❄️ Heat & Cold Proof – works from -40°F to 180°F
  • ♻️ Eco-Friendly – fully recyclable

⚖️ How It Stays in Place

You can add different ballast options depending on the site:

  • 💧 Water – for temporary use
  • 🏖 Sand or Concrete – for long-term setup
  • 🌬 Extra Ballast – for high-wind areas

➡️ Supports 5–15 pounds per square foot.


🏢 Where You Can Use It

PlaceWhy It’s a Great Fit
Big Box StoresNo roof holes = no water leaks
Apartments & CondosQuiet setup, no drilling noise
Factories & WarehousesEasy to move if business relocates
Windy AreasAdd weight easily to stay secure
Coastal BuildingsSalt air won’t cause rust

⚙️ Fits All Solar Panels

  • 📐 Works with 60-cell, 72-cell, and thin-film panels
  • ☀️ Panel tilt options from 5° to 15°
  • 🔧 No special tools needed – parts snap together easily

🔄 Compare To Other Systems

This HDPE solution is the best option for:

  • Flat roofs that cannot be penetrated
  • Quick installations (great for solar contractors)
  • Removable setups for leased buildings
  • Wind-prone zones that need extra ballast

🔗 Also check out:


📋 Full Technical Details

CaraterísticaDescription
MaterialUV-stabilized HDPE plastic
Resistência à carga do ventoUp to 130 mph (meets ASCE 7-16 standards)
Compatible Roof TypesTPO, EPDM, PVC, Bitumen, Gravel, Flat Metal
Setup Time30 minutes per kW
Ballast OptionsWater (short-term), Sand/Gravel (long-term)
Panel TiltAdjustable 5°–15°
Compatible Modules60/72-cell & thin-film solar panels
Operating Temperature-40°F to 180°F
Tempo de vida25 years

💡 Why People Choose This System

  • Building Owners – Avoid damaging waterproofing layers
  • Solar Installers – 50% faster installation, no drilling
  • Coastal Projects – No rusting from sea air
  • Renters – Portable, take it with you if you move
  • Eco Brands – 100% recyclable solution
HDPE Plastic Solar Ballast Mounting System 2 2

🧠 Quick Terms To Know

  • Non-Penetrating = No holes in the roof
  • Ballast Mount = Stays put using weight
  • HDPE = High-Density Polyethylene, a durable plastic
  • Flat Roof = A roof with less than 5° slope

💡 Want to upgrade your system? Visit our Solar Mounting Accessories section to find the perfect add-ons.


👷 Who Uses This the Most?

  • 🏢 Office Buildings
  • 🏫 Schools
  • 🏬 Shopping Centers
  • 🏭 Factories
  • 🏢 Warehouses
  • 🏘 Apartment Complexes

Anyone with a flat roof who wants to go solar without making holes!


🚀 Final Thoughts

The HDPE Plastic Solar Ballast Mounting System is a smart choice for flat roof solar installations. It’s quick, roof-safe, wind-resistant, and built to last—without the need to drill a single hole.

✅ No holes
✅ No leaks
✅ No worries

Start your solar project with confidence!


Centro de ajuda

Tem alguma dúvida? Consulte esta pergunta e as respostas

Firstsolar tem fábrica própria com mais de 80 trabalhadores qualificados e experientes, a linha de produção está estritamente de acordo com padrões elevados e atribui grande importância ao controlo de qualidade e inspeção.

Naturalmente, os nossos engenheiros de produção de primeira classe, técnicos e equipa de I & D oferecem soluções inovadoras e fiáveis aos clientes com base em mais de 8 anos de experiência.

Sim, Firstsolar tem fornecido serviço OEM, serviço de design e serviço de etiqueta do comprador por mais de 10 anos.

Sim, os produtos do Firstsolar foram certificados pela ISO, SGS, TUV e AS/NZS 1170.2.

Depende da quantidade da encomenda e dos seus requisitos especiais. Geralmente, o prazo é de 1 a 2 semanas.

Se o montante total for inferior a US$5000, necessitamos de 100% de adiantamento; se o montante total for superior a US$5000, necessitamos de 30%T/T de adiantamento