🛡️Hot Dip Galvanizing Fencing Panels for Ground Mount Solar System
🕢 [ Preencha o formulário e responderemos em 24 horas! ]
These fencing panels keep your solar power system safe. They are made from strong steel and covered with hot dip galvanizing to stop rust.
🌟 Why This Fence Is Great
- Strong steel lasts many years
- Hot dip galvanized to stop rust
- Keeps your painéis solares safe from people and animals
- Works in sun, rain, snow, and vento
- Easy to put up
🧱 What It’s Made Of
| Part | Material | Special Coating |
|---|---|---|
| Fence Panel | Q235/Q355 Steel | Hot Dip Galvanized 70–100μm |
| Fence Post | Carbon Steel | Anti-rust Galvanized |
| Fence Mesh | Welded Steel Wire | Zinc-Coated |
📏 Sizes
| Item | Details |
|---|---|
| Height | 0.8m to 1.8m |
| Post Span | 2 m or customized |
| Mesh Spacing | 70*150mm or 100*100mm |
| Coating | 80μm – 100μm |
| Wind Load | Up to 60 m/s |
| Snow Load | Up to 2.4 KN/m² |
| Colors | Silver |
🏞️ Where You Can Use It
| Place | Why It’s Good |
|---|---|
| Solar Farms | Keeps people and animals out |
| Agricultural Land | Protects panels from cows and goats |
| Industrial Sites | Adds security |
| Homes | Looks nice and keeps kids safe |
| Deserts | Works well in sun and heat |
| Coastal Areas | Stops salt from causing rust |
🔗 Related Products
- Check our Sistema de montagem solar no solo to match with your fencing.
- For farms, visit Terras agrícolas Sistema de montagem solar.
- Want full rust-proof solutions? See our Hot Dip Galvanized Photovoltaic C-shaped Steel Bracket.
- For fence alternatives, look at Spray Plastic Metal Mesh Fencing.
- Need cable protection too? Try our Solar Pv Cable for Solar Energy Panels.
🛠️ Easy to Use
- Pre-cut e pre-drilled
- You only need a few basic tools
- Can be put up in just one day
💪 Lasts a Long Time
- No need to paint
- Can last 30 years
- Works with any ground solar mounting system
✅ Why Choose This Fence
- Safe
- Tough
- Looks good
- Low cost over time
- Made to fit your solar project
📦 Package Includes
- Fence Panels
- Posts
- Clamps and Connectors
- Instruction Manual
Project Reference
Centro de ajuda
Tem alguma dúvida? Consulte esta pergunta e as respostas
Firstsolar tem fábrica própria com mais de 80 trabalhadores qualificados e experientes, a linha de produção está estritamente de acordo com padrões elevados e atribui grande importância ao controlo de qualidade e inspeção.
Naturalmente, os nossos engenheiros de produção de primeira classe, técnicos e equipa de I & D oferecem soluções inovadoras e fiáveis aos clientes com base em mais de 8 anos de experiência.
Sim, Firstsolar tem fornecido serviço OEM, serviço de design e serviço de etiqueta do comprador por mais de 10 anos.
Sim, os produtos do Firstsolar foram certificados pela ISO, SGS, TUV e AS/NZS 1170.2.
Depende da quantidade da encomenda e dos seus requisitos especiais. Geralmente, o prazo é de 1 a 2 semanas.
Se o montante total for inferior a US$5000, necessitamos de 100% de adiantamento; se o montante total for superior a US$5000, necessitamos de 30%T/T de adiantamento
English
Korean
Japanese
German
French
Greek
Arabic
Russian
Thai
Vietnamese
Italian
Spanish
Portuguese
Dutch
Bengali
Croatian
Czech
Danish
Hungarian
Malay
Persian
Polish
Romanian
Serbian
Swedish
Afrikaans
Kazakh
Uzbek