Spray Plastic Metal Mesh Fencing for Solar Photovoltaic Power Station

🕢 [ Completați formularul și vă vom răspunde în termen de 24 de ore! ]


🌟 Why Pick This Fence

  • Stops people and animals from getting too close
  • Made with PVC coated metal mesh
  • Works in hot, cold, wind, and rain
  • Easy to put up and take care of
  • Looks neat and clean

🔍 What It’s Made Of

PartDetails
MaterialQ195 or Q235 low-carbon steel wire
Wire Size3.0mm before spray, 3.9–4.0mm after
Mesh ShapeRectangle: 75mm × 150mm
CoatingPVC or hot dip galvanizing
ColorGreen, White, Blue, Red (custom too)

📏 Sizes and Strength

FeatureSpecification
Fence Height1.2m / 1.5m / 1.8m
Post TypeRound: 48mm or Square: 40x40mm
Wind ResistanceUp to 88 m/s
Snow LoadUp to 2.0 KN/m²
Life Span25+ years
Warranty10 years

Metal Fence Type 1

Metal Fence Type 1 2

Metal Fence Type 2

Metal Fence Type 1 1 1

🛠️ How to Install

Three ways to set up the fence:

  • Embed in the ground
  • Use flange base
  • Bolt it into concrete

All parts are pre-cut. Very easy to set up.


🏞️ Where You Can Use It

This spray plastic fencing is good for many places:

PlaceWhy It Works Well
Big Solar FarmsKeeps panels safe from people and animals
Farms with Solar PanelsStops cows and goats from walking near the panels
Factories & BuildingsAdds security for commercial solar stations
Houses with Solar SystemsLooks nice and keeps kids and pets away
Hot or Coastal AreasThe spray coating protects from sun and salt

🔗 Related Products


📦 What’s in the Box

  • Fence Panels (you pick the height)
  • Fence Posts
  • Connectors and Bolts
  • Tools and Setup Guide

💡 Good to Know

  • Fence is UV-resistant
  • No rust for 25+ years
  • Saves money over time because no repainting needed
  • Matches many solar rack systems

Best for

  • Solar panel fencing
  • Metal mesh fencing for solar farms
  • PVC spray fencing for PV sites
  • Rust-proof security mesh
  • Protective fencing for solar power plants

Centrul de ajutor

Aveți o întrebare? Vă rugăm să verificați această întrebare și răspunsurile

Firstsolar are propria fabrică cu mai mult de 80 de lucrători calificați și experimentați, linia de producție este strict în conformitate cu standardele înalte și acordă o mare importanță controlului calității și inspecției.

Desigur, inginerii noștri de producție de primă clasă, tehnicienii și echipa de cercetare și dezvoltare oferă clienților soluții inovatoare și fiabile bazate pe mai mult de 8 ani de experiență.

Da, Firstsolar a furnizat servicii OEM, servicii de proiectare și servicii de etichetare a cumpărătorului pentru mai mult de 10 ani.

Da, produsele Firstsolar au fost certificate de lSo, sGS, TUV și AS/NZS 1170.2.

Depinde de cantitatea reală a comenzii și de cerințele dvs. speciale. În general, acesta va fi de 1-2 săptămâni.

Dacă suma totală este mai mică de US$5000, avem nevoie de 100% în avans; dacă suma totală este mai mare de US$5000, avem nevoie de30%T/Tîn avans